A clothespin-shaped tool called a clamp metre can be used to clamp around a live wire and measure the current it is carrying.

Digital multimeter -Multiple electrical stimuli, including voltage, current, and resistance, are measured and verified by a digital multimeter, or DMM. It combines the functions of a voltmeter, ammeter, and ohmmeter and is used often by technicians and electrical engineers for diagnostic purposes.

Panel metres are digital or analogue electrical devices that show a signal input. The ability to transfer data to other devices, such as computers, and alarm choices, among other capabilities, are extra features found on some panel metres.

In order to determine position or motion, an incremental encoder translates the angular motion or position of a shaft into an analogue or digital code. One of the most widely used types of rotary encoders is the incremental encoder.

The physical construction and packaging of multiple IGBT power semiconductor dies into a single package is known as an IGBT power module.

An electrical tool called a line tester is used in electrical installations to check for the existence of electricity and to determine the phase or live wire. A tiny light enclosed inside the tester's handle begins to illuminate when its metal tip makes contact with a live circuit.

A line tester is an electrical tool used to test the presence of current and to identify phase / live wire in electrical installations. When the metal tip of the tester comes in contact with a live circuit, a small light encased inside the handle of the tool starts glowing.

A digital multi meter, or DMM, measures and verifies multiple electrical stimuli, including voltage, current and resistance. It's a daily diagnostic tool used by technicians and electrical engineers and combines the features of a voltmeter, ammeter and ohmmeter.

A Digital Multimeter monitors and verifies voltage, current, and resistance. It combines the functions of a voltmeter, an ammeter, and an ohmmeter and is a common diagnostic equipment used by technicians and electrical engineers.

The Quantek is a benchtop, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed food packages. The Model 905 is used for the measurement of residual oxygen in food packages.

Multiple electrical stimuli, including voltage, current, and resistance, are measured and verified by a digital multimeter, or DMM. It combines the functions of a voltmeter, ammeter, and ohmmeter and is used often by technicians and electrical engineers for diagnostic purposes.

Electromagnetic Flow Meter- A magnetic flow meter (also known as an electromagnetic flow meter or mag meter) is a transducer that measures fluid flow using the voltage that is created across a liquid as a result of the liquid's movement through a magnetic field. In order to create a potential difference proportional to the flow velocity perpendicular to the flux lines, a magnetic field is provided to the metering tube. Electromagnetic induction is the underlying physical principle. The magnetic flow meter needs an electrically insulating pipe surface, such as a steel tube lined with rubber, as well as a conducting fluid, such as water that includes ions.

Commercial and Industrial Pressure Gauges. Commercial gauges are general purpose pressure measuring instruments commonly used in Heating Ventilation Air Conditioning (HVAC) and Refrigeration. Industrial pressure gauge is suitable for production processes that would not block the pressure system.

The Thermocouple-Type K is a temperature sensing device that is widely used in industrial and scientific applications. This particular model has a Type K thermocouple, which is made from a combination of nickel and chromium. It has a diameter of 22mm and a length of 18", making it suitable for measuring temperatures in a variety of settings.

The Thermocouple-Type J is a temperature sensing device that is widely used in industrial and scientific applications. This particular model has a Type J thermocouple, which is made from a combination of iron and constantan. It has a diameter of 6mm and a length of 6", making it suitable for measuring temperatures in a variety of settings.

The Thermocouple-Type K is a temperature sensing device that is widely used in industrial and scientific applications. This particular model has a Type K thermocouple, which is made from a combination of nickel and chromium. It has a diameter of 22mm and a length of 18x18 inches (two probes), making it suitable for measuring temperatures in a variety of settings.

The Thermocouple-Type K with SS 310 material is a temperature sensing device that is widely used in industrial and scientific applications. This particular model has a Type K thermocouple, which is made from a combination of nickel and chromium. It has a diameter of 22mm and a length of 18x18 inches (two probes), and is made from SS 310 material, making it suitable for high temperature applications.

Type K Thermocouple (Chromel+ / Alumel –) K is the most common type of thermocouple. It's inexpensive, accurate, reliable, and has a wide temperature range. Type K wire is commonly found in food applications because its alloys "do not" rust or oxidize.

The Thermocouple-Type PT is a temperature sensing device that is widely used in industrial and scientific applications. This particular model has a sensor diameter of 6mm and a length of 6 inches, making it compact and suitable for a range of applications. It is designed to be durable and reliable, with a rugged construction that can withstand harsh environments.

Water Level Controller-Current Range/`to 22 Amp