BRUSH BANISTER HAIR HAND.

TWIST DRILL BIT, HIGH SPEED STEEL, SIZE ARE: 1.5MM, 2MM, 2.5MM, 3MM, 3.5MM, 4MM, 4.5MM, 5MM, 5.5MM, 6MM, 6.5MM, 7MM, 7.5MM, 8MM, 8.5MM, 9MM, 10MM, 11MM & 12MM, TYPE: STANDARD STRAIGHT SHANK, STANDARD: IS 5101, MANUFACTURER: IT/ADDISON/JK/MIRANDA.

HSS TAPER SHANK STANDARD TWIST DRILL, SIZES: 20 mm, TWIST DRILLS SHOULD BE AS PER STANDARD BS 328 PART 1: 1993/ DIN 345 : 1978,

TWIST DRILL,HSS,25.5MM TYPE: TAPER SHANK, STANDARD: BS 328 PART 1: 1993/DIN 345: 1978, MANUFACTURER: ADDISON, MANUFACTURER: J.K, MA NUFACTURER: MIRANDA TOOLS, MANUFACTURER: IRWIN

HSS TAPER SHANK STANDARD TWIST DRILL, SIZES:16 mm, TWIST DRILLS SHOULD BE AS PER STANDARD BS 328 PART 1: 1993/ DIN 345 : 1978,

SCREW EXTRACTOR SET,HRC45-48, QUANTITY: SIX PIECE, MATERIAL: CARBON STEEL, WITH HARDNESS: 45 TO 48 HRC, FOR EXTRACTING BROKEN SCREWS AND STUDS, FOR MID TENSILE STRENGTH SCREWS AND STUDS, 1) FOR SCREW 1/8 TO 1/4 INCH OR M3 TO M6, 2) FOR SCREW 1/4 TO 5/16 INCH OR M6 TO M8, 3) FOR SCREW 5/16 TO 7/16 INCH OR M8 TO M11, 4) FOR SCREW 7/16 TO 9/16 INCH OR M11 TO M14, 5) FOR SCREW 9/16 TO 3/4 IN CH OR M14 TO M18, 6) FOR SCREW 3/4 TO 1 INCH OR M18 TO M25.

TAP HANDLE,M6-M30 TYPE: ADJUSTABLE, FOR MANUFACTURE: ADDISON / JK / MIRANDA / EVEREST AND BHARAT

TAP SET,HSS,M6X1.00P STANDARD: IS 7800, 1975, FOR HAND THREADING

HAND TAP,12X1.25MM NOMINAL DIA: 12 MM, PITCH: 1.25 MM, MANUFACTURER: I. T, ADDISON, J. K, MIRANDA

HAND TAP NOMINAL DIA 24 MM X 3.00 PITCH. MANUFACTURER: I.T, ADDISON, J.K, MIRANDA

TAP HAND,HSS,GROUND THREAD,M4 x 0.7 MM PITCH CONSISTING OF 3 TAPS/SETR AS PER IS:6175-1992.

TAP SET,HSS,M6X1.00P STANDARD: IS 7800, 1975, FOR HAND THREADING

TAP HAND HSS GROUND THREAD M8 X 1.25 MM PITCH CONSISTING OF 3

TAP,HAND,HIGH SPEED STEEL,M10X1.50P TYPE: GROUND THREAD, CONSISTS OF 3 TAP / SET, STANDARD: IS 6175-1992

TAP HAND HSS GROUND THREAD M12 x 1.75 MM PITCH CONSISTING OF 3 TAPS/SET AS PER IS:6175-1992.

TAP HANDLE,M6-M30 TYPE: ADJUSTABLE, FOR MANUFACTURE: ADDISON / JK / MIRANDA / EVEREST AND BHARAT

TWIST DRILL,8X330MM,IS:7822,1983

TWIST DRILL,HSS,DIA:12X395 MORSE TAPER SHANK,EXTRA LENGTH,EXTRA LONG SERIES II STANDARD:IS:7822,Make: Addision

TWIST DRILL,HSS,DIA:20MM,OAL:490MM MORSE TAPER SHANK OF EXTRA LONG SERIES HAVING TOOL TYPE:N FOR RIGHT HAND CUTTING CONFIRMING TO IS:7822,1983 STD:IS:7822 REV1,1983

MECHANICAL CRIMPING TOOL,0.5-16SQMM